aopis logo


Exxon / Mobil Engine Oil 291 MSDS - US



                        430298-00 MOBIL JET OIL 291
                       MATERIAL SAFETY DATA BULLETIN
---------------------------------------------------------------------------

--------------------------------------------------------------------------
1. PRODUCT AND COMPANY IDENTIFICATION
--------------------------------------------------------------------------
PRODUCT NAME: MOBIL JET OIL [PREV HIT][NEXT HIT]291SUPPLIER: EXXONMOBIL CORPORATION
          3225 GALLOWS RD.
          FAIRFAX,  VA   22037
24 - Hour Health and Safety Emergency (call collect):  609-737-4411
24 - Hour Transportation Emergency (Primary) CHEMTREC: 800-424-9300
                                           (Secondary) 281-834-3296
Product and Technical Information:   800-662-4525    703-846-6693
MSDS Fax on Demand: 613-228-1467, other MSDS information: 856-224-4644

--------------------------------------------------------------------------
2. COMPOSITION/INFORMATION ON INGREDIENTS
--------------------------------------------------------------------------
CHEMICAL NAMES AND SYNONYMS: SYN. HYDROCARBONS AND ADDITIVES
GLOBALLY REPORTABLE MSDS INGREDIENTS:
None.
OTHER INGREDIENTS:
  Substance Name           Approx. Wt%
  --------------           -----------
  TRICRESYL PHOSPHATE             1-5
   (1330-78-5)
  ALKYLATED DIPHENYL AMINES       <1
   (68411-46-1)
See Section  8 for exposure limits (if applicable).

--------------------------------------------------------------------------
3. HAZARDS IDENTIFICATION
--------------------------------------------------------------------------
Under normal conditions of use, this product is not considered hazardous
according to regulatory guidelines (See section 15).
EMERGENCY OVERVIEW: Dark Amber Liquid.  DOT ERG No. :  NA. SEC:  0
POTENTIAL HEALTH EFFECTS: No significant effects expected.
POTENTIAL ENVIRONMENTAL EFFECTS: Harmful to aquatic organisms, may
     cause long-term adverse effects in the aquatic environment.
For further health effects/toxicological data, see Section 11.

--------------------------------------------------------------------------
4. FIRST AID MEASURES
--------------------------------------------------------------------------
EYE CONTACT: Flush thoroughly with water.  If irritation occurs, call
     a physician.
SKIN CONTACT: Wash contact areas with soap and water.
INHALATION: Not expected to be a problem.
INGESTION: Not expected to be a problem.  However, if greater than 1/2
     liter(pint) ingested, immediately give 1 to 2 glasses of water
     and call a physician, hospital emergency room or poison control
     center for assistance.  Do not induce vomiting or give anything
     by mouth to an unconscious person.

--------------------------------------------------------------------------
5. FIRE-FIGHTING MEASURES
--------------------------------------------------------------------------
EXTINGUISHING MEDIA: Carbon dioxide, foam, dry chemical and water fog.
SPECIAL FIRE FIGHTING PROCEDURES: Water or foam may cause frothing.
     Use water to keep fire exposed containers cool.  Water spray may
     be used to flush spills away from exposure.  Prevent runoff from
     fire control or dilution from entering streams, sewers, or
     drinking water supply.
SPECIAL PROTECTIVE EQUIPMENT: For fires in enclosed areas, fire
     fighters must use self-contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None.
Flash Point C(F): 246(475) (ASTM D-92).
Flammable Limits (approx.% vol.in air) -   LEL: NE,   UEL: NE
NFPA HAZARD ID:   Health: 0,  Flammability: 1,  Reactivity: 0

--------------------------------------------------------------------------
6. ACCIDENTAL RELEASE MEASURES
--------------------------------------------------------------------------
NOTIFICATION PROCEDURES: Report spills as required to appropriate
     authorities.  U. S. Coast Guard regulations require immediate
     reporting of spills that could reach any waterway including
     intermittent dry creeks.  Report spill to Coast Guard toll free
     number (800) 424-8802.  In case of accident or road spill notify
     CHEMTREC (800) 424-9300.
PROCEDURES IF MATERIAL IS RELEASED OR SPILLED: Adsorb on fire
     retardant treated sawdust, diatomaceous earth, etc.  Shovel up
     and dispose of at an appropriate waste disposal facility in
     accordance with current applicable laws and regulations, and
     product characteristics at time of disposal.
ENVIRONMENTAL PRECAUTIONS: Prevent spills from entering storm sewers
     or drains and contact with soil.
PERSONAL PRECAUTIONS: See Section 8

--------------------------------------------------------------------------
7. HANDLING AND STORAGE
--------------------------------------------------------------------------
HANDLING: No special precautions are necessary beyond normal good
     hygiene practices.  See Section 8 for additional personal
     protection advice when handling this product.
STORAGE: Do not store in open or unlabelled containers.  Store away
     from strong oxidizing agents or combustible material.
EMPTY CONTAINER WARNING: Empty containers retain residue (liquid
     and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD,
     BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT,
     FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION;
     THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Do not attempt to
     refill or clean container since residue is difficult to remove.
     Empty drums should be completely drained, properly bunged and
     promptly returned to a drum reconditioner. All containers should
     be disposed of in an environmentally safe manner and in
     accordance with governmental regulations.

--------------------------------------------------------------------------
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
--------------------------------------------------------------------------
OCCUPATIONAL EXPOSURE LIMITS:
When mists/aerosols can occur, the following are recommended:  5 mg/m3
(as oil mist)- ACGIH Threshold Limit Value (TLV), 10 mg/m3 (as oil mist)
- ACGIH Short Term Exposure Limit (STEL), 5 mg/m3 (as oil mist) - OSHA
Permissible Exposure Limit (PEL)
VENTILATION: No special requirements under ordinary conditions of use
     and with adequate ventilation.
RESPIRATORY PROTECTION: No special requirements under ordinary
     conditions of use and with adequate ventilation.
EYE PROTECTION: Normal industrial eye protection practices should be
     employed.
SKIN PROTECTION: No special equipment required.  However, good
     personal hygiene practices should always be followed.

--------------------------------------------------------------------------
9. PHYSICAL AND CHEMICAL PROPERTIES
--------------------------------------------------------------------------
Typical physical properties are given below.  Consult Product Data Sheet
for specific details.
APPEARANCE: Liquid
COLOR: Dark Amber
ODOR: Mild
ODOR THRESHOLD-ppm: NE
pH: NA
BOILING POINT C(F): > 316(600)
MELTING POINT C(F): NA
FLASH POINT C(F): 246(475) (ASTM D-92)
FLAMMABILITY (solids): NE
AUTO FLAMMABILITY C(F): NE
EXPLOSIVE PROPERTIES: NA
OXIDIZING PROPERTIES: NA
VAPOR PRESSURE-mmHg 20 C: < 0.1
VAPOR DENSITY: NE
EVAPORATION RATE: NE
RELATIVE DENSITY, 15/4 C: 0.99
SOLUBILITY IN WATER: Negligible
PARTITION COEFFICIENT: NE
VISCOSITY AT 40 C, cSt: > 26.4
VISCOSITY AT 100 C, cSt: > 4.9
POUR POINT C(F): -60(-76)
FREEZING POINT C(F): NE
VOLATILE ORGANIC COMPOUND: NE
            NA=NOT APPLICABLE NE=NOT ESTABLISHED D=DECOMPOSES
FOR FURTHER TECHNICAL INFORMATION, CONTACT YOUR MARKETING REPRESENTATIVE

--------------------------------------------------------------------------
10. STABILITY AND REACTIVITY
--------------------------------------------------------------------------
STABILITY (THERMAL, LIGHT, ETC.): Stable.
CONDITIONS TO AVOID: Extreme heat.
INCOMPATIBILITY (MATERIALS TO AVOID): Strong oxidizers.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide.
HAZARDOUS POLYMERIZATION: Will not occur.

--------------------------------------------------------------------------
11. TOXICOLOGICAL DATA
--------------------------------------------------------------------------
                         ---ACUTE TOXICOLOGY---
ORAL TOXICITY (RATS):  Practically non-toxic (LD50:  greater than 2000
     mg/kg).  ---Based on testing of similar products and/or the
     components.
DERMAL TOXICITY (RABBITS):  Practically non-toxic (LD50:  greater than
     2000 mg/kg).  ---Based on testing of similar products and/or the
     components.
INHALATION TOXICITY (RATS):  Practically non-toxic (LC50:  greater
     than 5 mg/l).  ---Based on testing of similar products and/or the
     components.
EYE IRRITATION (RABBITS):  Practically non-irritating.  (Draize score:
     0 or greater but 6 or less).  ---Based on testing of similar
     products and/or the components.
SKIN IRRITATION (RABBITS):  Practically non-irritating.  (Primary
     Irritation Index:  greater than 0.5 but less than 3).  ---Based
     on testing of similar products and/or the components.
                       ---OTHER TOXICOLOGY DATA---
Note to physicians:  this product contains specially synthesized
     phosphate esters which have produced weak inhibition of
     acetylcholinesterase in experimental animals but have not caused
     delayed neurotoxicity or inhibition of brain neuropathy target
     esterase (NTE).

--------------------------------------------------------------------------
12. ECOLOGICAL INFORMATION
--------------------------------------------------------------------------
ENVIRONMENTAL FATE AND EFFECTS:
This environmental assessment was conducted using information on the
     individual components as no test data was available for this
     specific formulation.
ECOTOXICITY: This product is expected to be harmful to aquatic
     organisms. May cause long-term adverse effects in the aquatic
     environment.
MOBILITY: Not established.
PERSISTENCE AND DEGRADABILITY: Not established.
BIOACCUMULATIVE POTENTIAL: Not established.

--------------------------------------------------------------------------
13. DISPOSAL CONSIDERATIONS
--------------------------------------------------------------------------
WASTE DISPOSAL: Product is suitable for burning in an enclosed,
     controlled burner for fuel value or disposal by supervised
     incineration.  Such burning may be limited pursuant to the
     Resource Conservation and Recovery Act.  In addition, the product
     is suitable for processing by an approved recycling facility or
     can be disposed of at an appropriate government waste disposal
     facility.  Use of these methods is subject to user compliance
     with applicable laws and regulations and consideration of product
     characteristics at time of disposal.
RCRA INFORMATION:  The unused product, in our opinion, is not
     specifically listed by the EPA as a hazardous waste (40 CFR,
     Part 261D), nor is it formulated to contain materials which
     are listed hazardous wastes.  It does not exhibit the hazardous
     characteristics of ignitability, corrosivity, or reactivity. The
     unused product is not formulated with substances covered by the
     Toxicity Characteristic Leaching Procedure (TCLP).  However, used
     product may be regulated.

--------------------------------------------------------------------------
14. TRANSPORT INFORMATION
--------------------------------------------------------------------------
USA DOT:  NOT REGULATED BY USA DOT.
RID/ADR:  NOT REGULATED BY RID/ADR.
IMO:  NOT REGULATED BY IMO.
IATA:  NOT REGULATED BY IATA.

--------------------------------------------------------------------------
15. REGULATORY INFORMATION
--------------------------------------------------------------------------
US OSHA HAZARD COMMUNICATION STANDARD: Product assessed in accordance
     with OSHA 29 CFR 1910.1200 and determined not to be hazardous.
EU Labeling: Product is dangerous as defined by the European Union
     Dangerous Substances/Preparations Directives.
  Symbol: Not applicable.
  Risk Phrase(s): R52/53.
     Harmful to aquatic organisms, may cause long-term adverse effects in
     the aquatic environment.
  Safety Phrase(s): Not applicable.
Governmental Inventory Status: All components comply with TSCA, and
     EINECS/ELINCS.  Not all components in the product are listed on
     AICS, however a commercial evaluation permit exists.
U.S. Superfund Amendments and Reauthorization Act (SARA) Title III:
  This product contains no "EXTREMELY HAZARDOUS SUBSTANCES".
  SARA (311/312) REPORTABLE HAZARD CATEGORIES: None.
  This product contains no chemicals subject to the supplier notification
  requirements of SARA (313) toxic release program.
The following product ingredients are cited on the lists below:
CHEMICAL NAME                         CAS NUMBER     LIST CITATIONS
-------------                         ----------     --------------
                    *** NO REPORTABLE INGREDIENTS ***
                    --- REGULATORY LISTS SEARCHED ---
1=ACGIH ALL  6=IARC 1     11=TSCA 4    16=CA P65 CARC   21=LA RTK
2=ACGIH A1   7=IARC 2A    12=TSCA 5a2  17=CA P65 REPRO  22=MI 293
3=ACGIH A2   8=IARC 2B    13=TSCA 5e   18=CA RTK        23=MN RTK
4=NTP CARC   9=OSHA CARC  14=TSCA 6    19=FL RTK        24=NJ RTK
5=NTP SUS   10=OSHA Z     15=TSCA 12b  20=IL RTK        25=PA RTK
                                                        26=RI RTK
Code key: CARC=Carcinogen; SUS=Suspected Carcinogen; REPRO=Reproductive

--------------------------------------------------------------------------
16. OTHER INFORMATION
--------------------------------------------------------------------------
USE: JET TURBINE LUBRICANT
NOTE: PRODUCTS OF EXXON MOBIL CORPORATION AND ITS AFFILIATED COMPANIES
ARE NOT FORMULATED TO CONTAIN PCBS.
Health studies have shown that many hydrocarbons pose potential human
health risks which may vary from person to person. Information provided
on this MSDS reflects intended use. This product should not be used for
other applications. In any case, the following advice should be
considered:
INJECTION INJURY WARNING:  If product is injected into or under the skin,
or into any part of the body, regardless of the appearance of the wound
or its size, the individual should be evaluated immediately by a
physician as a surgical emergency.  Even though initial symptoms from
high pressure injection may be minimal or absent, early surgical
treatment within the first few hours may significantly reduce the
ultimate extent of injury.
INDUSTRIAL LABEL
Under normal conditions of intended use, this product does not pose a
risk to health.  Excessive exposure may result in eye, skin or
respiratory irritation.  Always observe good hygiene measures.  First
Aid: Wash skin with soap and water.  Flush eyes with water.  If
overcome by fumes or vapor, remove to fresh air.  If ingested do not
induce vomiting.  If symptoms persist seek medical assistance.  Read
and understand the MSDS before using this product.
Precautionary Label Text:
CONTAINS CHEMICAL ADDITIVE
For industrial use only.  Not intended or suitable for use in or around a
household or dwelling.
Empty container may contain product residue, including flammable or
explosive vapors.  Do not cut, puncture, or weld on or near container.
All label warnings and precautions must be observed until container has
been thoroughly cleaned or destroyed.
Refer to product Material Safety Data Bulletin for further safety and
health information.  MPL368A
-------------------------------------------------------------------------
*************************************************************************
For Internal Use Only:  MHC:  1* 1* 0* 0* 1*, MPPEC:  A, TRN:  430298-00,
ELIS:  407314, CMCS97:  97E094, REQ:  MIAMI, SAFE USE:  L
EHS Approval Date: 02OCT2002
*************************************************************************

*************************************************************************
Information given herein is offered in good faith as accurate, but
without guarantee. Conditions of use and suitability of the product for
particular uses are beyond our control; all risks of use of the product
are therefore assumed by the user and WE EXPRESSLY DISCLAIM ALL
WARRANTIES OF EVERY KIND AND NATURE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN RESPECT TO THE
USE OR SUITABILITY OF THE PRODUCT. Nothing is intended as a
recommendation for uses which infringe valid patents or as extending
license under valid patents. Appropriate warnings and safe handling
procedures should be provided to handlers and users. Alteration of this
document is strictly prohibited. Except to the extent required by law,
republication or retransmission of this document, in whole or in part, is
not permitted. Exxon Mobil Corporation and its affiliated companies
assume no responsibility for accuracy of information unless the document
is the most current available from an official ExxonMobil distribution
system. Exxon Mobil Corporation and its affiliated companies neither
represent nor warrant that the format, content or product formulas
contained in this document comply with the laws of any other country
except the United States of America.
*************************************************************************
Copyright 2001 Exxon Mobil Corporation, All rights reserved