430298-00 MOBIL JET OIL 291 MATERIAL SAFETY DATA BULLETIN --------------------------------------------------------------------------- 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: [PREV HIT][NEXT HIT]JET OIL 291MANUFACTURER CODE: 430298 CMCS CODE: 97E094 SUPPLIER: MOBIL [PREV HIT][NEXT HIT]OIL AUSTRALIA PTY LTD A.B.N. 88 004 052 984 417 ST. KILDA RD. MELBOURNE 3004 Telephone: (03) 9252 3111 Fax: (03) 9866 9079 After hours: National Emergency Communication System 1-800-023-005 Product Information contact: Mobil Lubeline on 1-800-033-863 Contact Point: Mobil LubeLine 1-800-033-863 Worksafe Classification: Not classified as hazardous according to criteria of Worksafe Australia. 2. COMPOSITION/INFORMATION ON INGREDIENTS GENERIC COMPOSITION: SYN. HYDROCARBONS AND ADDITIVES GLOBALLY REPORTABLE MSDS INGREDIENTS: None. OTHER INGREDIENTS: Substance Name Approx. Wt% EU Classification -------------- ----------- ---------------------------- TRICRESYL PHOSPHATE 1-5 N;R51/53 (1330-78-5) ALKYLATED DIPHENYL AMINES <1 N;R51/53 (68411-46-1) 3. HAZARDS IDENTIFICATION This product is considered hazardous according to regulatory guidelines (See Section 1). POTENTIAL HEALTH EFFECTS: No significant effects expected. POTENTIAL ENVIRONMENTAL EFFECTSHarmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. For further health effects/toxicological data, see Section 11. 4. FIRST AID MEASURES EYE CONTACT: Flush thoroughly with water. If irritation persists, call a doctor. SKIN CONTACT: Wash contact areas with water. INHALATION: Not expected to be a problem. INGESTION: Not expected to be a problem. However, if greater than 1/2 litre is ingested or if feeling uncomfortable, give 1 to 2 glasses of water and obtain medical attention. Do not attempt to induce vomiting or give anything by mouth to an unconscious person. NOTE TO PHYSICIANS: Treat symptoms with reference to specific health effects identified above. 5. FIRE-FIGHTING MEASURES EXTINGUISHING MEDIA: Foam, dry chemical, CO2 and water fog. SPECIAL FIRE FIGHTING PROCEDURES: Water or foam may cause frothing. Use water to cool fire-exposed containers. Water spray may be used to flush spills away from exposures. Prevent runoff from fire control or dilution from entering waterways, sewers or drinking water supply. SPECIAL PROTECTIVE EQUIPMENT: For fires in enclosed areas, firefighters must use self-contained breathing apparatus. UNUSUAL FIRE AND EXPLOSION HAZARDS: None. Flash Point C (F): 246(475) (IP 36 / ASTM D-92). Flammable Limits (approx.% vol.in air)- LELNE, UEL: NE NFPA HAZARD ID: Health: 0 , Flammability: 1 , Reactivity: 0 6. ACCIDENTAL RELEASE MEASURES NOTIFICATION PROCEDURES: Report spills as required to appropriate authorities such as the local Environmental Health Officer or Fire Brigade. If spills are likely to enter any drain, waterway or groundwater, contact the Area Water Authority. In case of accident or road spill, contact the Police and Fire Brigade and, if appropriate, the Area Water Authority. PROCEDURES IF MATERIAL IS RELEASED OR SPILLED: Contain and adsorb on suitable chemical absorbent material, etc. Shovel up and dispose of at an appropriate licensed waste disposal site in accordance with current applicable laws and regulations and product characteristics at time of disposal. ENVIRONMENTAL PRECAUTIONS: Prevent spills from entering storm sewers or drains and contact with soil. PERSONAL PRECAUTIONS: See Section 8 7. HANDLING AND STORAGE HANDLING: No special precautions are necessary beyond normal good hygiene practices. See Section 8 for additional personal protection advice when handling this product. STORAGE: Do not store in open or unlabelled containers. Store away from strong oxidizing agents or combustible material. See Section 15 for Regulatory information when storing this product. EMPTY CONTAINER WARNING: Empty containers retain residue (liquid and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Do not attempt to refill or clean container since residue is difficult to remove. Empty drums should be completely drained, properly bunged and promptly returned to a drum reconditioner. All containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION OCCUPATIONAL EXPOSURE LIMITS: When mists/aerosols can occur, the following is recommended: 5 mg/m3 as [PREV HIT][NEXT HIT]oil mist (NOHSC). VENTILATION: No special requirements under ordinary conditions of use and with adequate ventilation. RESPIRATORY PROTECTION: No special requirements under ordinary conditions of use and with adequate ventilation. EYE PROTECTION: Normal industrial eye protection practices should be employed. SKIN PROTECTION: No special equipment required. However, good personal hygiene practices should always be followed. 9. PHYSICAL AND CHEMICAL PROPERTIES Typical physical properties are given below. Consult Product Data Sheet for specific details. PHYSICAL STATE: Liquid COLOUR: Dark Amber ODOUR: Mild ODOUR THRESHOLD (ppm): NE pH: NA Boiling Point C (F): > 316(600) Melting Point C (F): NA Flash Point C(F): 246(475) (IP 36 / ASTM D-92) FLAMMABILITY (solids): NE AUTO FLAMMABILITY C(F): NE EXPLOSIVE PROPERTIES: NA OXIDIZING PROPERTIES: NA Vapour Pressure-mm Hg 20 C: < 0.1 VAPOUR DENSITY: NE EVAPORATION RATE: NE Relative Density, 15/4 C: 0.99 Solubility in Water: Negligible PARTITION COEFFICIENT: NE Viscosity at 40 C, cSt: > 26.4 Viscosity at 100 C, cSt: > 4.9 Pour Point C: -60(-76) FREEZING POINT C(F): NE NA=Not Applicable, NE=Not Established, D=Decomposes For further technical information, contact your Mobil Marketing Representative. 10. STABILITY AND REACTIVITY STABILITY (Thermal, Light, etc.): Stable. CONDITIONS TO AVOID: Extreme heat. INCOMPATIBILITY (Materials to Avoid): Strong oxidisers. HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide. HAZARDOUS POLYMERISATION: Will not occur. 11. TOXICOLOGICAL DATA ---ACUTE TOXICOLOGY--- ORAL TOXICITY: Practically non-toxic (LD50: greater than 2000 mg/kg). ---Based on testing of similar products and/or the components. DERMAL TOXICITY: Practically non-toxic (LD50: greater than 2000 mg/kg). ---Based on testing of similar products and/or the components. INHALATION TOXICITY: Practically non-toxic ---Based on testing of similar products and/or the components. EYE IRRITATION: Practically non-irritating. (Draize score: 0 or greater, but 6 or less). ---Based on testing of similar products and/or the components. SKIN IRRITATION: Practically non-irritating. (Primary Irritation Index: greater than 0.5, but less than 3). ---Based on testing of similar products and/or the components. ---OTHER TOXICOLOGY DATA--- Note to physicians: this product contains specially synthesized phosphate esters which have produced weak inhibition of acetylcholinesterase in experimental animals but have not caused delayed neurotoxicity or inhibition of brain neuropathy target esterase (NTE) 12. ECOLOGICAL INFORMATION ENVIRONMENTAL FATE AND EFFECTS: This environmental assessment was conducted using information on the individual components as no test data was available for this specific formulation. ECOTOXICITY: This product is expected to be harmful to aquatic organisms. May cause long-term adverse effects in the aquatic environment. MOBILITY: Not established. PERSISTENCE AND DEGRADABILITY: Not established. BIOACCUMULATIVE POTENTIAL: Not established. 13. DISPOSAL CONSIDERATIONS WASTE DISPOSAL: Product is suitable for burning in an enclosed, controlled burner for fuel value or disposal by supervised incineration. Such burning may be limited by the local authority. In addition, the product is suitable for processing by an approved recycling facility or can be disposed of at an appropriate licensed waste disposal site. Use of these methods is subject to user compliance with applicable laws and regulations and consideration of product characteristics at time of disposal. 14. TRANSPORT INFORMATION ACTDG: NOT REGULATED BY ACTDG. IMO: NOT REGULATED BY IMO IATA: NOT REGULATED BY IATA 15. REGULATORY INFORMATION Australian Classifications: UN Number: NA HAZCHEM Code: Not applicable Dangerous Goods Class/Subsidiary Risk: Not applicable Packaging Group: NA AS 1940 Class: C2 Poisons Schedule: Exempt EC Labeling: Product is dangerous as defined by the European Union Dangerous Substances/Preparations Directives. Symbol: Not applicable. Risk Phrase(s): R52/53. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Safety Phrase(s): Not applicable. Governmental Inventory Status: All components comply with TSCA, and EINECS/ELINCS. Not all components in the product are listed on AICS, however a commercial evaluation permit exists. THE FOLLOWING PRODUCT INGREDIENTS ARE CITED ON THE LISTS BELOW: CHEMICAL NAME CAS NUMBER LIST CITATIONS *** NO REPORTABLE INGREDIENTS *** --- REGULATORY LISTS SEARCHED --- 1=IARC 1 2=IARC 2A 3=IARC 2B 4=NTP CARC 5=NTP SUS 6=ACGIH 7=ACGIH CARC 8=ACGIH SUS CARC=CARCINOGEN; SUS=SUSPECTED CARCINOGEN; TERAT=TERATOGENIC 16. OTHER INFORMATION USE: [PREV HIT][NEXT HIT]JET TURBINE LUBRICANT NOTE: EXXONMOBIL PRODUCTS ARE NOT FORMULATED TO CONTAIN PCBS. Health studies have shown that many hydrocarbons pose potential human health risks which may vary from person to person. Information provided on this MSDS reflects intended use. This product should not be used for other applications. In any case, the following advice should be considered: INJECTION INJURY WARNING: If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency. Even though initial symptoms from high pressure injection may be minimal or absent, early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury. This MSDS meets Worksafe Australia accepted format requirements. ********************************************************************** For Internal Use Only: MHC: 1* 1* 0* 0* 1*, MPPEC: A, TRN: 430298-00, ELIS: 407314, CMCS97: 97E094 Issue Date: 02OCT2002 ********************************************************************** Information given herein is offered in good faith as accurate, but without guarantee. Conditions of use and suitability of the product for particular uses are beyond our control; all risks of use of the are therefore assumed by the user and WE EXPRESSLY DISCLAIM ALL WARRANTIES OF EVERY KIND AND NATURE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN RESPECT TO THE USE OR SUITABILITY OF THE PRODUCT. Nothing is intended as a recommendation for uses which infringe valid patents or as extending license under valid patents. Appropriate warnings and safe handling procedures should be provided to handlers and users. ************************************************************************* Prepared by: Exxon Mobil Corporation EMBSI, Clinton, NJ USA For further information, contact: Mobil Oil Australia Limited, Mobil Lube Line 417 St.Kilda Road, Melbourne 3004 Tel: (03) 9252-3030 or 1-800-033-863 [HOME] [SEARCH] [PREV LIST] [CURR LIST] [NEXT LIST] [FIRST DOC] [PREV DOC]